1) Rinse the collecting cells and
prefilters with hot water (maximum 120°F, 49°C). Hold spray applicator
approximately 5” away from collecting cells and prefilters and spray thoroughly
from all sides.
2) Let stand for 5 minutes. Rinse
well with hot water. If dirt remains, soak collecting cell in a solution of Dax
Cleaner and hot water for 30 minutes. Rinse well.
3) Tip air cleaner collecting cell on
a 45° angle and allow cell to dry completely. If arcing occurs when cell is
placed back in unit, turn air cleaner off, remove cell and allow more drying